 |
 |
||||||||||||||||||||||||||||
The
CORE spin™ banner is a simple
and robust single-sided rollup banner that is guaranteed to stand
up to the task. CORE spin™ banners have feet that simply ‘spin’ out for extra stability. CORE spin™ banners are supplied in padded bags and are available in 4 different sizes; the mini 600mm, 850mm, 1000mm, and the giant 1200mm. |
|||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||
Grip-Rails are
available for use
with textile prints
or those that do
not bond with
adhesives. |
Optional
Adjustable Poles
allow you to adjust
your graphic to
whatever height
you want. |
Low-Voltage
Spotlights clip
to the pole
and illuminate
your graphic for
maximum impact. |
CORE spin™
banners are covered by a 5-Year Guarantee against component failure
for maximum peace of mind.
|
 |
|||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||
 |
Streamlined design |
 |
‘Spin out’ feet |
 |
Slide-in graphics |
 |
Padded carry bag |
 |
|||||||||||||||||||||
 |
|||||||||||||||||||||||||||||
It is quite simple to install graphics into the banner
following these simple instructions. In order to replace
graphics simply carry out these steps in reverse order
to remove the original graphic. It is therefore very important that you KEEP THE LOCKING PIN in the pocket found
in the lid of the padded bag, as this will be needed to lock the tension in the Internal Roller before changing the
panel. For best results ensure graphic panel media does not exceed 300 MICRONS in total thickness. |
 |
||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||
 |
Step 1: Affix Panel Strip
to the back of the panel at
the top with the red and
yellow tapes ensuring panel
remains straight. |
 |
Step 2: Slide the Banner
Rail along the Panel Strip
at the top of the panel as
shown. Secure the Banner
Rail with tape if desired. |
 |
Step 3: Adhere the bottom
of the panel to the leader
emerging from the base
unit with the double sided
tape on the leader. |
 |
Step 4: Whilst holding the
panel remove the locking
pin at one end of the
banner |
 |
Step 5: Let the graphic
panel gently retract into
the base. |
 |
|||||||||||||||||||
 |
|||||||||||||||||||||||||||||
 |
 |
 |
|||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copyright ©2007 CORE Display Systems Ltd.